Auto GPS Trackers , Car GPS Tracking Systems Support CAN BUS
|
Hardware features |
|
|
Hardware framework
|
Adopt double core chip, RTKe embedded OS
|
|
Communication module
|
GPRS, SMS double channels module
|
|
Reliability design
|
Quadruple protection for power source, 4 levels watchdog
|
|
PCB protection
|
Three proofing protection
|
|
Water-proof design
|
Water-proof design for casing, water-proof grade IP67
|
|
Technical specifications
|
|
|
Working voltage
|
10～60 V/DC
|
|
Limiting voltage
|
100V/DC
|
|
Car battery protecting voltage
|
Low: 10V(12V car battery)or 20V(24V car battery)high:60V
|
|
Power voltage of Anti-reversed connection
|
≥100V
|
|
Average working current
|
70mA DC 12V
|
|
Power saving mode
|
＜30mA DC 12V
|
|
Backup battery
|
Working time 3h
|
|
Dimension
|
85x 134x 35mm(L x W x H)
|
|
Canning material
|
Aluminum alloy
|
|
Main device weight
|
0.35kgnet weight
|
|
Interface
|
|
|
GPS antenna
|
BNC interface: －26dB cable length: 4m
|
|
GSM antenna
|
SMA interface: －3dB cable length: 3m
|
|
Vehicle detecting interface
|
2 routes(1 route high level, 1 route low level)
|
|
AD detecting interface
|
1 route AD signal input(for fuel consumption detecting GPS device)
|
|
Communication interface
|
1 route CAN BUS
1 route 485 port
|
|
Data interface
|
1 route RS-232 serial port
|
Product functions:
1.Signal detecting and control:
6 routes signal sensor, 7 vehicle status detecting, intelligence mode and forced mode to cut fuel/circuit; user-defined backup output control.
2.Alarm:
8 alarms, 3 modes of alarm.
3.Monitoring:
vehicleautomatic tracking/monitoring, regions setting, geo-fence, GPS mileage statistics, blind area supplementary report, traces storage, base station positioning.
4.BUS communication:
via CAN/485 BUS to achieve two ways communication between PLC controller and service center, real time monitor vehicle status and control vehicle.
5.Fuel consumption detecting:
build-in AD input interface, equipped floater attenuation cable can measure fuel consumption.
6.Remote update:
main device’s program was support to remote download; user can renew the program remotely.
7.Protection:
Power saving mode: in this mode, GPS device’s working current will drop to30mA@12V when vehicle was in flameout.
Car battery over discharge protection: it will switch to supply power by backup battery if car battery’s voltage is very low (10V).
Over voltage protection: it will cut the external circuit to protect GPS device if the voltage exceeds limit value (60V), backup battery can work for 3h.
Product configurations:
1. Standard configurations
1)main device 1 pcs
2)GSM antenna 1 pcs
3)GPS antenna 1 pcs
4)Warranty card
5)Certification
2. Optional configurations
1). Accessories (relay) for cut fuel/circuit
2). Accessories for fuel detecting (floater attenuation cable)
Your message must be between 20-3,000 characters!
