Product Details:
Payment & Shipping Terms:
|
Vdieo Standards: | PAL(625line,50f/s);NTSC(525line,60f/s) | Play Quality: | D1/Half-D1/CIF/QCIF |
---|---|---|---|
Play Quality: | D1/Half-D1/CIF/QCIF | Bidrectional Talk: | Supported |
Record Mode: | Manual>alarm>motion Detection>timing | Record Storage: | HDD,network |
Dimension: | 193(length)*198(width)86(height)mm | Weight: | 1.5kg |
High Light: | mobile dvr for vehicles,car dvr with gps |
GPS Mobile DVR Recorder HDD Storage Remote Monitoring View Local Playback
Product Feature
FAQ
Q: When 3G has neither report nor video , what should be done first?
A: Press INFO key to enter the system information page, check whether the SIM card exists and view the signal strength as well as dial-up status, whether the antenna is in good contact, and then check the SIM to see whether it is out of traffic, the most basic judgment is to replace the SIM card. If the dial up failed with signal, then check whether the settings of center number and the port are correct. Moreover check whether the device number of the product is already occupied.
Q: 3G signal is intermittent, video is jammed?
A: At present the signal coverage of WCDMA and EVDO is rather wide, however, there are some mountainous districts without signal coverage, and some suburban areas have weak signal due to the local network constraints, then it will be jammed during watching of video, or video cannot be watched at all, the greatest impact of this situation is from the local network; Moreover check whether the frame rate setting of sub-stream is too high, because the video may also occur such situation when the network is poor and frame rate setting is high.
Q: How about when there is no video output from the vehicle host device?
A: 1.Check the host’s turn-on status, if only a blue light on, it means the host is in standby status and has not been started up yet, meanwhile check whether the host’s power cords red & yellow cords are in power supply status or not, if only one cord is supplying power, the device is unable to start up.
2.Check the power supply status of display screen, as well as check whether the display video has been switched to AV status.
3 Check the connecting status between the host’s video output cable and display screen.
4 check whether the lock status of the host’s LOCK, it must be locked before normal starting up.
Q: 3G signal is intermittent, video is jammed?
A: At present the signal coverage of WCDMA and EVDO is rather wide, however, there are some mountainous districts without signal coverage, and some suburban areas have weak signal due to the local network constraints, then it will be jammed during watching of video, or video cannot be watched at all, the greatest impact of this situation is from the local network; Moreover check whether the frame rate setting of sub-stream is too high, because the video may also occur such situation when the network is poor and frame rate setting is high.
Specification
|
Model |
MCH8GNN |
system |
Main processor |
Hi3520D |
Operating system |
Embedded LINUX operating system |
|
System resources |
Simultaneous multi-channel real-time recording, playback, network operation, USB backup |
|
interface |
user interface |
support 16-bit true color graphical menu interface and mouse operation |
preview screen |
1/4/8 |
|
video |
vdieo standards |
PAL(625line,50f/s);NTSC(525line,60f/s) |
vdieo compression |
H.264(Main Profile) |
|
display quality |
Monitor:D1 |
|
play quality |
D1/Half-D1/CIF/QCIF |
|
encode capacity |
8ch D1 real-time |
|
decode capacity |
1ch D1 real-time |
|
motion detect |
Zones: 392(22*18)detection zones per window,multi-level sensitivity |
|
audio |
audio compression |
G.711A |
bidrectional talk |
supported |
|
Record & playback |
record mode |
manual>alarm>motion detection>timing |
local playback |
Any channel playback simultaneously(1-4ch) |
|
search mode |
Time/calendar/event/channel search |
|
Storage & backup |
space occupation |
video:CIF 4~5G/ day*channel, D1 8~10G/ day*channel; |
record storage |
HDD,network |
|
backup mode |
Network backup,USB HDD,USB writer,U disk |
|
interface |
video input |
8ch |
video output |
1ch RCA (1.0Vp-p,75Ω),1ch for cable |
|
audio input |
8ch |
|
audio output |
1ch (200-3000mV,5K) |
|
alarm input |
4ch(multiplexing vehicle signal) |
|
alarm output |
2ch |
|
RJ45 interface |
no |
|
RS485, RS232 |
One RS485,one RS232 |
|
USB |
One USB |
|
HDD |
One SATA port,max.4T |
|
Mobile interface &functions |
GPIO signal |
Support vehicle name,speed,turn light,vehicle door,brake,Steering Information and other signals input;support vehicle information OSD overlay,storage etc. |
GPS |
Support |
|
|
others |
support delay boot up/shut down |
complement |
Exclusive player |
Support google map,showing vehicle running track and data. |
Platform |
Support auto registration,no need of port Mapping,getting rid of 3G access problem.Support google map,showing vehicle running track and data |
|
SDK |
Free SDK for second development |
|
others |
Power supply |
Wide voltage input 6V~36V,15% overvoltage protection,500MS 60V voltage surge |
External power supply |
Support 8* 12V controllable power supply for external camera,exclusive 12V and 5V output |
|
Power consumption |
<10W(HDD without) |
|
Working temperature |
0℃-+55℃ |
|
Working humudity |
10%-90% |
|
Atmospheric pressure |
86kpa-106kpa |
|
Dimension |
193(length)*198(width)86(height)mm |
|
weight |
1.5kg |
Contact Person: Ms. Lily
Tel: 1578393517
Fax: 86-757-8311557