|
Product Details:
Payment & Shipping Terms:
|
| Working Voltage: | 10～60 V/DC | Limiting Voltage: | 100V/DC |
|---|---|---|---|
| Average Working Current: | 70mA DC 12V | Power Saving Mode: | ＜30mA DC 12V |
| Backup Battery: | Working Time 3h | Canning Material: | Aluminum Alloy |
| High Light: | gps cat tracker,gsm gprs gps tracker |
||
Customized Waterproof Vehicle GPS Tracker GPS Supports CAN Bus
Water-proof casing design is a patent can prevent GPS device was damaged by into water, use aviation socket for IO interface, easy to connect with cables; CAN/485 BUS interface, easy to control vehicle; 1 route AD input interface can detect fuel consumption and temperature; especially suitable for engineering truck, special vehicle that run in severe environment.
Main features:
● Based international newest chip, double core structure, build-in RTKe OS, powerful.
● GPRS and SMS double channels, TCP and UDP double working mode
● Positioning based GPS reflected wave, assist with base station, strong capacity to prevent blocking to reduce the blind area
● Three proofing design, Quadruple protection for power source, 4 levels watchdog
● Anti-dismantle design for SIM card
● Low power consumption
● Build-in high capacity backup battery
● CAN/485 BUS interface.
● It can update remotely, easy to maintain
● Approved by 3C, and approved by national grade quality authentication.
Product functions:
1.Signal detecting and control:
6 routes signal sensor, 7 vehicle status detecting, intelligence mode and forced mode to cut fuel/circuit; user-defined backup output control.
2.Alarm:
8 alarms, 3 modes of alarm.
3.Monitoring:
vehicleautomatic tracking/monitoring, regions setting, geo-fence, GPS mileage statistics, blind area supplementary report, traces storage, base station positioning.
4.BUS communication:
via CAN/485 BUS to achieve two ways communication between PLC controller and service center, real time monitor vehicle status and control vehicle.
5.Fuel consumption detecting:
build-in AD input interface, equipped floater attenuation cable can measure fuel consumption.
6.Remote update:
main device’s program was support to remote download; user can renew the program remotely.
7.Protection:
Power saving mode: in this mode, GPS device’s working current will drop to30mA@12V when vehicle was in flameout.
Car battery over discharge protection: it will switch to supply power by backup battery if car battery’s voltage is very low (10V).
Over voltage protection: it will cut the external circuit to protect GPS device if the voltage exceeds limit value (60V), backup battery can work for 3h.
Performance parameters:
|
Performance parameter: |
|
|
Hardware framework |
Adopt double core chip, RTKe embedded OS |
|
Communication module |
GPRS, SMS double channels module |
|
Reliability design |
Quadruple protection for power source, 4 levels watchdog |
|
PCB protection |
Three proofing protection |
|
Water-proof design |
Water-proof design for casing, water-proof grade IP67 |
|
Technical specifications |
|
|
Working voltage |
10～60 V/DC |
|
Limiting voltage |
100V/DC |
|
Car battery protecting voltage |
Low: 10V(12V car battery)or 20V(24V car battery)high:60V |
|
Power voltage of Anti-reversed connection |
≥100V |
|
Average working current |
70mA DC 12V |
|
Power saving mode |
＜30mA DC 12V |
|
Backup battery |
Working time 3h |
|
Dimension |
85x 134x 35mm(L x W x H) |
|
Canning material |
Aluminum alloy |
|
Main device weight |
0.35kgnet weight |
|
Interface |
|
|
GPS antenna |
BNC interface: －26dB cable length: 4m |
|
GSM antenna |
SMA interface: －3dB cable length: 3m |
|
Vehicle detecting interface |
2 routes(1 route high level, 1 route low level) |
|
AD detecting interface |
1 route AD signal input(for fuel consumption detecting GPS device) |
|
Communication interface |
1 route CAN BUS 1 route 485 port |
|
Data interface |
1 route RS-232 serial port |
|
Environment features |
|
|
Vehicle spark noise immunity |
Discharge voltage 10 kV～20 kV, discharge frequency 20 times/s～200 times/s |
|
Electro-transient pulse noise immunity |
4KV, experiment grade IV |
|
Static discharge noise immunity |
Contacting discharge 6KV, air discharge 8KV, experiment grade III |
|
Conduction interference limits |
Accord with the requirements of class B |
|
Radiated interference limits |
Accord with the requirements of class B |
|
Temperature characteristic |
Working temperature -20 ℃～+60 ℃ Limiting temperature -30 ℃～-20℃, +60℃～+70℃ |
|
Humidity |
5％～95％ non-condensation |
Product configurations:
1. Standard configurations
1)main device 1 pcs
2)GSM antenna 1 pcs
3)GPS antenna 1 pcs
4)Warranty card
5)Certification
2. Optional configurations
1). Accessories (relay) for cut fuel/circuit
2). Accessories for fuel detecting (floater attenuation cable)
|
GPS features |
|
|
Tracking sensitivity |
－159dBm |
|
Positioning time |
Cold boot less than 34s; hot boot less than 3.5s; warm boot less than 33s, re-capture time 1.0s |
|
Positioning accuracy |
10m2D RMS |
|
Speed accuracy |
0.1m/s |
|
BS positioning accuracy |
100m |
|
GSM/GPRS features |
|
|
Frequency |
EGSM900/GSM1800 |
|
Transmitting power |
EGSM900: CLASS4(2W), GSM1800:CLASS1(1W) |
|
GPRS |
GPRS multi-slot class8－class 10 |
|
Data storage |
|
|
Trace record storage |
50, 000 trace record |
|
Buffer memory for supplemental report (blind area) |
500 (points) tracking info |
|
Road detecting storage |
Can set 8 roads’ data, each road can be constituted by 1023 broken lines and 256 stations |
|
Attribute areas storage |
Can set 108 rectangle areas (can set 20 polygon areas) |
Product picture:
Contact Person: Ms. Lily
Tel: 1578393517
Fax: 86-757-8311557
