|
Product Details:
Payment & Shipping Terms:
|
| Working Voltage: | 9～33 V/DC | Limiting Voltage: | 100V/DC |
|---|---|---|---|
| Average Working Current: | 70mA DC 12V | Power Saving Mode: | ＜20mA DC 12V |
| Backup Battery: | Working Time 3h | Canning Material: | Aluminum Alloy |
| High Light: | gps cat tracker,gsm gprs gps tracker |
||
Aluminum alloy Vehicle GPS Tracking Devices With RS232 Port
Main Features:
● Based international newest chip, double core structure, powerful
● GPRS and SMS double channels, TCP and UDP double working mode
● Positioning based GPS reflected wave, assist with base station, strong capacity to prevent blocking to reduce the blind area
●Three proofing design, Quadruple protection for power source, 4 levels watchdog
● Low power consumption,
● Build-in high capacity backup battery.
● Broad intelligence interface to achieve automatic report station for bus, LED screen to release Ads
● Build-in TTS voice module to achieve the function of voice report.
● It can update remotely, easy to maintain
● Approved by 3C, and approved by national grade quality authentication.
Product Functions:
1.Signal detecting and control:
13 routes signal sensor, 17 vehicle status detecting, intelligence mode and forced mode to cut fuel/circuit, user-defined backup output control.
2.Alarm:
19 alarms, 3 modes of alarm.
3.Monitoring:
vehicleautomatic tracking/monitoring, regions setting, geo-fence, GPS mileage statistics, blind area supplementary report, traces storage, base station positioning.
4.Road detecting:
road detecting, road detecting calculation, departure alarm, speeding alarm, entry/exit station report…
5.Voice and phone call:
hands free phone, remote listen in, voice reminding device, TTS voice report.
6.Fuel consumption detecting:
build-in 2 routes AD input interface, equipped floater attenuation cable can measure fuel consumption, and equipped temperature can detect the temperature.
7.LED screen for release Ads info:
Downlink Ads to screen via RS232 port and show Ads on the screen.
8.Image:
monitor by image, store/record image, image transmission.
9.Remote update:
main device’s program was support to remote download; user can renew the program remotely.
10.Protection
Power saving mode: in this mode, GPS device’s working current will drop to20mA@12V when vehicle was in flameout.
Car battery over discharge protection: it will switch to supply power by backup battery if car battery’s voltage is very low (9.5V).
Over voltage protection: it will cut the external circuit to protect GPS device if the voltage exceeds limit value (36V), backup battery can work for 3h.
Performance Parameters:
|
Hardware features |
|
|
Hardware framework |
Adopt double core chip |
|
Communication module |
GPRS, SMS double channels module |
|
Reliability design |
Quadruple protection for power source, 4 levels watchdog |
|
PCB protection |
Three proofing protection |
|
Technical specifications |
|
|
Working voltage |
9～33 V/DC |
|
Limiting voltage |
100V/DC |
|
Car battery protecting voltage |
Low: 9V (12V car battery) or 20V(24V car battery)high:36V |
|
Power voltage of Anti-reversed connection |
≥100V |
|
Average working current |
70mA DC 12V |
|
Power saving mode |
＜20mA DC 12V |
|
Backup battery |
Working time 3h |
|
Dimension |
88x 62.5x 32.5mm(L x W x H) |
|
Canning material |
Aluminum alloy |
|
Main device weight |
0.26kgnet weight |
|
Interface |
|
|
GPS antenna |
SMA interface: －26dB cable length: 5m |
|
GSM antenna |
SMA interface: －3dB cable length: 3m |
|
Vehicle detecting interface |
9 routes signal input |
|
AD detecting interface |
2 routes AD signal input (for enhancement type II, III, IV) |
|
Video interface |
Serial port for video input, it can expand to 4 video input |
|
Voice interface |
2 route voice port |
|
Data interface |
2 route RS-232 serial port |
|
Environment features |
|
|
Vehicle spark noise immunity |
Discharge voltage 10 kV～20 kV, discharge frequency 20 times/s～200 times/s |
|
Electro-transient pulse noise immunity |
4KV, experiment grade IV |
|
Static discharge noise immunity |
Contacting discharge 6KV, air discharge 8KV, experiment grade III |
|
Conduction interference limits |
Accord with the requirements of class B |
|
Radiated interference limits |
Accord with the requirements of class B |
|
Temperature characteristic |
Working temperature -20 ℃～+60 ℃ Limiting temperature -35 ℃～-20℃, +60℃～+70℃ |
|
Humidity |
5％～95％ non-condensation |
Product Configuration:
1. Standard configuration
1)main device 1 pcs
2)GSM antenna 1 pcs
3)GPS antenna 1 pcs
4)Installation cables 1 set
5)Usage instructions
6)Warranty card
7)Certification
2. Optional configuration
1). Hands free speaker
2). Handset
3). Listen in mic
4). LCD
5). Accessories (relay) for cut fuel/circuit)
6). Camera
Big mother camera
Big son camera (can multi-son camera)
7) Switching cable 0740-i-46 for camera
8). Accessories for fuel detecting (floater attenuation cable)
9). Accessories for temperature detecting
|
GPS features |
|
|
Tracking sensitivity |
－159dBm |
|
Positioning time |
Cold boot less than 34s; hot boot less than 3.5s; warm boot less than 33s, re-capture time 1.0s |
|
Positioning accuracy |
10m2D RMS |
|
Speed accuracy |
0.1m/s |
|
BS positioning accuracy |
100m |
|
GSM/GPRS features |
|
|
Frequency |
EGSM900/GSM1800 |
|
Transmitting power |
EGSM900:CLASS4(2W), GSM1800:CLASS1(1W) |
|
GPRS |
GPRS multi-slot class8－class 10 |
|
Data storage |
|
|
Trace record storage |
50, 000 trace record |
|
Buffer memory for supplemental report (blind area) |
500 (points) tracking info |
|
Road detecting storage |
Can set 8 roads’ data, each road can be constituted by 1023 broken lines and 256 stations |
|
Attribute areas storage |
Can set 108 rectangle areas (can set 20 polygon areas) |
|
Image storage |
It can store more than 200 pictures locally |
Contact Person: Ms. Lily
Tel: 1578393517
Fax: 86-757-8311557
