Payment & Shipping Terms:
|Communication Mode:||GSM/GPRS/CDMA||Application Fields:||Taxi, Passenger Vehicle, Bus And Etc|
|Working Voltage:||8-36V/DC (limit Voltage 100V)||Working Temperature:||-20 To +60 Centidegree|
|Working Humidity:||5%-95%||Power:||Working Status 1.2w;sleeping Mode 0.7w|
1800MHz / 1900 MHz AVL GPS Tracking For Taxi , Tracker GPS
Adopt industrial grade communication module group, 50 channels positioning, Support 8-36V wide voltage, High voltage protection, Small cubage, Setting convenience, Steady Capability , Resist power supply reverse-connect, resist static, electromagnetism compatible, vibration endurable.
GPS Main Device, GPS Antenna, GSM Antenna, TTS voice report device , Power Supply cable, Panic Button, Lock Vehicle relay, Monitor Mic.
Taxi, Passenger vehicle, Bus and etc.
Positioning (GPS, Target location):
it can real time locate target if installed this device.
surveillance center can tracking target real time.
GPS terminal connect GPRS network periodcally to ensure data transmission smoothly.
after target out of GSM blind area, send supplemental information to surveillance center immediately.
Emergency alarm, mute listening:
when user need help, press SOS then it will send an alarm immediately, surveillance center was authorized to listen in the condition inside vehicle, and help to solve the event.
when there is an alarm, surveillance center can remove alarm after the event was solved.
GPS open circuit alarm:
when GPS antenna was damaged unwittingly or by act of man, it will send a GPS open circuit alarm to surveillance center.
when vehicle's speed exceed the value manager set, it will send a overspeed alarm to surveillance center.
Alarm of Off-course:
when vehicle deviate the travel route manager set, GPS device will generate an alarm automatically and send to surveillance center.
Main power lost alarm, battery cell low voltage alarm:
when vehicle battery can not supply power normally due to damaged or loss, the backup power inside the device will supply power, and send an alarm to surveillance center to ask for solve the problem, driver can drive vehicle normally.
Enter into limit area alarm:
when vehicle enter into the prohibited area manager set, GPS device will send this alarm to surveillance center.
Out of bound alarm
:when vehicle leave the area manager set, GPS device will send this alarm to surveillance center.
when vehicle be Stealing, GPS device detect the signal from the anti-theft alarm system which installed in vehicle, it will send Stealing alarm immediately.
Replay history data:
surveillance center can view and play vehicle's history trace.
manager can cut vehicle's fuel/circuit to stop the vehicle via surveillance center when vehicle be Stealing.
after cut fuel/circuit, manager can restore fuel/circuit via surveillance center, then vehicle can be start and drive normally.
Remote control, parameters setting:
surveillance center can remote control the vehicle and alter relevant parameters of GPS device.
GPRS ＋ SMS:
GPS device can support GPRS and GSM data transmission at the same time to ensure the positioning data not be lost.
Manual set function:
installation personnel or maintain worker can set relevant parameters of GPS device via handset to reduce the communication cost.
GPS device local/remote update:
when need change GPS device's functions, it can be upgrade via RS232 serial port components, no need dismantle the main device and parts.
if GPS devices have fault, it can be analyse and handle remotely, avoid the trouble of long-distance trip.
Intelligent supply power and charge:
GPS device can connect with 12V or 24V voltage of vehicel battery directly, and identify vehicle battery voltage automatically. It will switch to inside backup battery automatically if it is undervoltage, and automatic charge when external power source get right.
TTS voice report:
main device received GPRS text message, it will report the message by voice, driver no need to read it manually.
Working voltage:8-36V/DC (limit voltage 100V)
Power supply resist reverse connection feature:≥80V
Working current:average 110mA @ DC 12V;power save status＜45mA @ DC 12V
Power:Working status 1.2w;sleeping mode 0.7w
Exterior dimension:114×62.1×33.2mm (L×W×H) (aluminium alloy crust)
Weight:0.32kg (main device net weight)
Support frequency band:850MHz/900MHz/1800MHz/1900MHz
Working temperature:-20 to +60 centidegree
Inside battery charge time:3-4 Hours
Inside battery working time:3-5 Hours