Payment & Shipping Terms:
gps tracker device,
gsm gprs gps tracker
6V - 24V SIRF3 Chip Vehicle Mini GPS Trackers With 1500mAh Li-ion Battery
GPS chip:SIRF3 chip
Time To First Fix:Cold status 45s
All that is required is a Pre-Paid GSM SIM Card from GSM Wireless Provider.
(The required SIM Card is not Included - Only Text Message Fees from Wireless Provider will apply with purchase of Prepaid GSM SIM Card)
2.1 Positioning and Tracking: Through the on-line Positioning Platform,the included personal platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.
2.2 Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed unit will send out alarm to the authorized numbers.
2.3 Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and anytime.
2.4 Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter.
2.5 Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.
2.6 Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.
2.7 Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it breaches the district.
2.8 the unit: send SMS to resume the default of unit.
2.9 Auto Track: You can set up auto track by SMS or on-line positioning platform.
2.10 Mileage statistics; ACC checking; cutting off power and alarm.
2.11 Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning.
2.12 Modify the IP and Port of Communication Protocol for different on-line positioning platform
Vehicle rental / Fleet management etc
Anti-thief, Protect your car/vehicle/wealth etc
Provide peace-of-mind for businessmen
Dim:85mm x 63mm x 25mm(3.3”*2.5”*0.98”)
Band:850/1800/1900Mhz or 900/1800/1900Mhz or 850/900/1800/1900
GPS chip:SIRF3 chip
GSM/GPRS module:Siemens MC55 or Siemens MC56 or Simcom300 or Simcom340
Time To First Fix:Cold status 45s
Battery:Chargeable changeable 3.7V 1500mAh Li-ion battery
Storage Temp:-40°C to +85°C
Operation Temp:-20°C to +55°C
5. How to use:
5.1.1 Installed the tracker in the car, then put the SIM card into the tracker host outdoors.
5.1.2 For first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.)
5.1.3 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep flashing every 2 seconds when the GPS module is in standby mode. When the blue indicator is keep shine, the unit has been located.
5.1.4 When this unit receives GPS signals normally, you can use it and do all the following settings.
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the settings. (Default password: 123456)
5.3 Change the password
5.3.1 Send SMS "password+old password+space+new" password to change the password.
Remark: Make sure the new password is in 6 digits, or else the tracker can not recognize the password.
5.3.2 you can Send "resume+password" to the tracker, to restore the original setting in case of losing the new password.
There are only 4 numbers able to be authorized.
5.4.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number automatically.
5.4.2 Send SMS "admin+password+space+cell phone number" to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the number is successfully authorized, the unit will reply "admin ok!" in SMS.
5.4.3 Send SMS "noadmin+password+space+authorized number" to delete the authorized number.
5.4.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please "send admin123456 008613311113333" to tracker to set 13311113333 as an authorized number.
5.5 Real-time polling
5.5.1 If there is no authorized number, when any number dials up the unit, it will report a Geo-info; If there is already an authorized number, then it will not respond when an unauthorized number calls it up.
5.5.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-info with latitude,longitude, speed, time and date.
5.6 Auto Track
Report a Geo-info at 30s intervals to the authorized numbers for 15 times:
5.6.1 Set up: Send SMS "at30sum15+password" to the unit, it will report the Geo-info at 30s intervals for 15 times. The setting must be maximum 65535 in value.
5.6.2 Send SMS "at30sum0" to the unit, it will reply SMS heaps of times.
5.6.3 Cancel: Send noat+password to delete the “auto track”.
5.7 Remote control oil and circuit
5.7.1 Control oil
Send SMS "stopoil+password" to control oil. For example send SMS:stopoil123456
To supply the oil again, send SMS "supplyoil+password" to the unit.
5.7.2 Control circuit
Send SMS "stopelec+password" to control circuit. For example send SMS: stopelec123456
To supply the circuit again, send SMS "supplyelec+password" to the unit.
If there is no authorized number, all number can control. If there is already an authorized number, only the authorized number can control.
5.8 Modes switch between "tracker" and "monitor"
5.8.1 The default mode is "tracker".
5.8.2 Send SMS "monitor+password" to the unit, and it will reply “monitor ok!” and switch to “monitor”mode.
5.8.3 Send SMS "tracker+password" to the unit, it will reply “tracker ok!” and restore to “track” mode.
5.9 Geo-fence (can’t use in South Hemisphere Countries now)
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.
5.9.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS "stockade+password+space+longitude,latitude;longitude,latitude" (example: stockade123456 16.483087,054.639748;16.495212,054.646740) to unit to set the restricted district. In case of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.
Remark : The first longitude& latitude is coordinate of the top left corner of the Geo-fence, while the second longitude&latitude is the coordinate of the bottom right corner. It will alarm one time in each setting.
5.9.2 Cancel: Send SMS "nostockade+password" to deactivate this function.
This function will be out of effect after the unit moves outside the district
5.10 Movement alert
5.10.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS "move+password" to the unit, then the unit will reply “move ok!”. In case of such a movement, it will send SMS “Move” along with a Geo-info to the authorized numbers. It will alarm one time in each setting.
5.10.2 Cancel: Send SMS "nomove+password" to deactivate the movement alert.
Remark: This function will be out of effect after the unit moves outside the district
5.11 Overspeed alert:
5.11.1 Set up: Send SMS "speed+password+space+080" to the unit (suppose the speed is 80km/h), and it will reply "speed ok!". When the target moves exceeding 80 km/h, the unit will send SMS "speed+080!+Geo-info" to the authorized numbers. It will alarm one time in each setting.
5.11.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert
5.12 Restart the tracker.
Send SMS "root+password" to the tracker. For example“root123456”.The tracker will be restarted.
5.13 SOS button
Press the SOS for 3 second, it will send "help me !+ Geo-info" to all the authorized numbers every 3 minutes. It will stop sending such a SMS when any authorized number reply SMS "help me !+ Geo-info" to the tracker.
5.14 Cut power alert
If cut power, the unit will send SMS alert.
SMS format: " Cut power Alert+Geo-info
5.15 set number in a online positioning platform
Add the number on the online positioning platform for tracking. Adding to the special platform, send SMS "number+tracker number" to the tracker.
for example “number13500001111”. need the platform have the function.
5.16 Modes switch between “telephone” and “web
5.16.1 For sending GPS data to IP address:
Set up: Send SMS "web + password" to device.
if set successfully, the device will reply SMS "set web ok".
After this, you can call the tracker. The tracker will hang up the phone and report the GPS data to IP address.
5.16.2 For sending GPS data to telephone:
Set up: Send SMS "telephone + password" to device.
if set successfully, the device will reply ‘set telephone ok’.
And then, the device will send GPS data to your telephone by SMS.
Remark: The default is sending the GPS data to the telephone.
5.17 GPRS setting
In order to use GPRS function, the user needs to set IP, Port and APN ( access point name ) by sending SMS commands.
5.17.1 Set an IP address and port:
The IP address and port of Communication Protocol in the tracker can be modified and transferred data to other platform. Send SMS "IP address+port number" to the unit. If the tracker’s IP address and port should be modified to 220.127.116.11and 2456, send SMS "ip 18.104.22.168port2456"to the tracker.
5.17.2 Set APN
In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you don’t know the APN, you can consult local network service supplier. The format of set APN is "apn + password +space + APN". For example you send SMS "apn123456 cmnet" to the device. The device will reply SMS "Set APN ok. " .
5.17.3 If setup successful, the tracker will reply SMS adminip ok
5.17.4 Cancel: Send SMS "noadminip+123456"